3D Printer Manager

get_stl_info

Inspect an STL file without modifying it.

scale_stl

Scale a model uniformly with scale_factor, or per axis with scale_x, scale_y, and scale_z.

rotate_stl

Rotate a model around the X, Y, and Z axes, in degrees.

translate_stl

Move a model along the X, Y, and Z axes, in millimeters.

extend_stl_base

Add solid geometry underneath the model to raise and widen its base. extension_inches is in inches and is converted to millimeters (25.4 mm per inch).

merge_vertices

Merge vertices closer together than tolerance (millimeters, default 0.01).

center_model

Move the model so the center of its bounding box is at the origin (0, 0, 0).

lay_flat

Find the model's largest flat face and rotate the model so that face rests on the XY plane (Z = 0).

modify_stl_section

Apply a scale, rotation, or translation to one section of a model: the top, bottom, or center third of its bounding box, or a custom box. value_x, value_y, and…

generate_stl_visualization

Render an SVG with front, side, top, and isometric views of a model. width and height set each view's size in pixels (default 300).

get_printer_status

Read the printer's current status.

list_printer_files

List the files stored on the printer or its host software.

upload_gcode

Upload G-code to the printer, and optionally start it.

start_print

Start a G-code file that is already stored on the printer.

cancel_print

Cancel the current print job.

set_printer_temperature

Set a target temperature for a printer component.

print_3mf

Upload a sliced.3mf project to a Bambu printer over FTPS and start it with an MQTT project_file command that carries the plate's G-code path, its MD5, the AMS…

check_fulu_orca_setup

Inspect a FULU OrcaSlicer-bambulab install: the executable, the platform runtime payload, the install and verify commands, and optionally a BambuNetwork bridge…

fulu_bambu_network_rpc

Call one FULU BambuNetwork bridge method for diagnostics.

slice_stl

Slice an STL or 3MF with the configured slicer and return the output path: G-code for PrusaSlicer, Slic3r, generic OrcaSlicer, and CuraEngine, or a sliced.3mf…

slice_with_template

Slice an STL or 3MF with a named template from the local template registry.

list_templates

List the saved slicing templates (.3mf,.json,.config) in the registry directory, BAMBU_TEMPLATE_DIR (default ~/Sync/bambu/templates), or in template_dir.

save_template

Copy a local.3mf,.json, or.config file into the template registry. template_name defaults to the source filename without its extension.

get_slice_settings

Read the slicer settings in a 3MF, an extracted project_settings.config, or a profile JSON without slicing: layer height, infill, walls, supports, brim, bed,…

confirm_temperatures

Report every heater target in a G-code file: S and R forms, tool-addressed targets, RepRapFirmware G10/M568, and Klipper SET_HEATER_TEMPERATURE.

process_and_print_stl

Extend an STL's base, slice it, and print it through the same checked print gate as upload_gcode and print_3mf, including the human confirmation.

blender_mcp_status

Inspect the Blender MCP configuration.

blender_mcp_call

Call a tool the Blender MCP server advertises, such as get_scene_info or execute_blender_code, with arguments matching its discovered schema.

blender_mcp_export_stl

Export named objects from the live Blender scene to a new STL for slicing.

blender_mcp_edit_model

Import an STL into Blender, apply ordered edits, and export a new STL.