Embedded Debugger MCP

list_probes

Discover connected debug probes.

connect

Open a probe session for a target chip.

probe_info

Show active session information.

halt

Halt core execution.

run

Resume execution.

reset

Reset the core.

step

Single-step one instruction.

get_status

Read core/session status.

disconnect

Drop the session and clean up resources.

read_memory

Read target memory with configured size/range limits.

write_memory

Write target memory when enabled by configuration.

set_breakpoint

Set a hardware breakpoint.

clear_breakpoint

Clear a hardware breakpoint.

diagnose_fault

Read the Cortex-M SCB fault registers (CFSR/HFSR/MMFAR/BFAR/SHCSR/CPUID) plus PC/SP/LR in one call and return a compact structured evidence bundle with the set…

unwind_exception

Unwind the stack after a crash and map each frame to a source line.

flash_erase

Erase flash when erase permissions are enabled.

flash_program

Program ELF, HEX, or BIN files through probe-rs flash algorithms.

flash_verify

Compare raw expected data with target flash contents.

run_firmware

Erase, program, reset/run, and optionally attach RTT.

rtt_attach

Attach to a SEGGER RTT control block.

rtt_detach

Detach RTT.

rtt_channels

List discovered RTT channels.

rtt_read

Read from an up channel with max byte and timeout limits.

rtt_write

Write to a down channel.